2005 - 2013 Ford Lincoln Mercury 4-Button Replacement Keyless Entry Remote Key Fob by Keyless2Go

I purchased this product for a lady friend, who was drunk and left her purse in the bar. She wanted to spend a lot of money on a new key, but I decided to step in and purchase this generic key for her. Her vehicle is still being repaired, but with this new key, she now has access to her vehicle. Thank you!!!

Works perfectlyI had the key cut then I programmed it works perfectly

A $250 repair at the dealer cost me $60 thanks to this key.

Cut and programmed work like the stock remote

These are great replacement keys for Ford Expedition. Work perfect. Just as described.

First Cut key at locksmith. You will need two preprogrammed keys. Programming worked. See the instructions provided for IKT from seller or owner's guide manual. But IN ADDITION you my need to program doors/entry in a separate way. Close doors, turn to ON 8 times (NOT START). Press any button at 8th time; doors lock cycle if worked. ALSO may need to change the cr3032 battery in the new key before programming will work. Test all keys when done.

Had a local hardware store cut it from my only key and then programmed it with FORSCAN as s pare key. Saved well over a $100 if I had a local locksmith do it. Going to a 3rd key soon for remote start install.

Well made key with great range . Locksmith cut it and we programmed it using the 2 original key method .

Bought two keys and had them cut then programmed with FORSCAN. Programming worked with FORSCAN. FYI as I was unaware-FORSCAN only programs it to start the vehicle. It does not program the fob(buttons) to function. This requires a very simple separate procedure that is all over youtube.

Works like it should

Saved a boatload of $$ vs the dealership or other options. Got the actual key cut for $15 at a local locksmith and programmed it via web instructions for the fob and transponder. Wonderful!

Had it cut at hardware store and had a locksmith come out and program for $125. Beats $500 at dealership!

I loved that provider aswered all my questions

I purchased this product and unfortunately it was stolen the 1st time, waited for. Replacement to be sent out. I took it to a locksmith to get it cut, and I was able to program it. So…… the key locks and unlocks the doors aswell as opens the trunk. The downside is that it doesn’t start the car engine. I will take it to a car place to see if they can do it.

The key works great, however the instructions for my ford edge were completely wrong. All I had to do was get the key cut then put it in the ignition and turn it to the ON position 8 times quickly then the locks start locking and unlocking and you press and hold a button on the fob and it was programmed. Now it works great. Controls everything just like the original key fob.

We bought a vehicle and it only came with one key fob. The dealership wanted $200 for a spare key along with a cut and program fee. I bought this key for $30 and was told by the dealership there was only a 50/50 chance of it being able to be programmed. Most likely, they just wanted me to buy their key for $200. The key worked perfect and was able to be cut and programmed for a 2014 Ford fusion.

This key works great. The remote works good too. I work at a ford dealership and this key is about $90 less then the factory key. The housing feels harder and cheaper then the factory key, but you get what you pay for. Saving $90, I'm more then happy. I have seen aftermarket keys not program to the vehicle and the fobs not work. Not the case with theses, I'm getting another one.

Funciona bien

This key fob works. I had a guy program it for $20, he hooked me up. Don't let anyone overcharge you for cutting and programming it, call around and get the best deal. It did require them using that machine that hooks up to the car to do it, but it was done in a matter of seconds. Definitely recommend this key fob. I have a 2006 lincoln zephyr btw.

This is an excellent replacement key for my 2011 Ford Escape. I was able to program the remote to work and I cut the key by copying the original. However, unless you have 2 working keys you cannot program the transponder of the key to start the vehicle. You have to get a locksmith to match the key to the computer to start the car.

I bought this key as a 2nd key for 2011 Ford Fusion, which I bought with only one working key.After almost 3 years with just one key, the thought of having to go to a dealer for getting a 2nd key was too much.After I bought the key, the first time i cut it at Lowe's. The machine bent and damaged the key. They said they had never experienced this before and gave me a key and cut it for free to show the fault was not their's.I notified the seller and after few emails of negotiations, seller generously agreed to ship me a 2nd key for free. Really appreciate this gesture!Using key fob programming procedure, I was able to get the fob to lock/unlock doors/trunk without any issue.I took seller's advice and went to a local locksmith and this time the key was cut without any issue.Using a programming software, I was able to add this key and successfully start the engine.The only four star is for the thickness. But, if you go to a local locksmith, this shouldn't be an issue.Highly recommend this product and seller.From a highly satisfied customer that avoided paying $$$ to the dealer.

The key works and was a great price. The labels in the buttons all wore off really fast and the plastic feels flimsy and not strong. So far it still works but I worry it will break. We have had it for about two years already so if it does break I will buy another because i still consider it a good valueUpdate: we have now had the key 5 years and still works well. My fears of the key breaking are so far unfounded. The key has held up well to daily use, being dropped, etc

I took this blank key to Lowes, but they refused to copy it from my master key, so I took it to Ace hardware, and they gladly made a copy. They told me that they were responsible for programming it and it may or may not work. After Ace cut the key, it opened my drivers door no problem. I used the FORScan program with the lifetime $50 license and $49 OBDLINK® EX cable and programmed this key to start my 2011 Ford Expedition King Ranch. I used the key's directions on the website to program the buttons to lock/unlock, raise the tail gate and panic button. Well worth the money.

All the buttons work properly, and it works great after we lost the main key fob.

Excellent for the price

Much cheaper than dealer keys. The hardest part was convincing the guy at the hardware store that I didn't need him to program it.

We have a 2008 Mercury Mariner, my girlfriend bought this car used and it only had one key. I decided we needed an extra because it would be a tough situation to lose the only key. We got this key and got it cut like they original, we found tutorials on YouTube on how to “program” it and they are useful but we discovered you have to program it two different ways to be useful. We were only able to program it one way (this allows us to lock and unlock the doors and we can turn the key in the ignition to listen to the radio). The 2nd method needed to program this key? Well this is where it kind of went downhill, we couldn’t program it to start the car because they correct method requires that you already have two functional keys for our car. Since we cant program it the correct way, the anti-theft system disables the car so it cant be started when we use this key. This isn’t the fault of the company we bought the key from because it is a perfectly good product that is the same quality of the key we already have. But we will need to take this key to the dealer so they can help us complete the programming for it (we were trying to avoid the dealer to save a few dollars in the 1st place though lol).

Works just like the Original Keys.

A

I had only one key, takes two programed keys,to program with vehicle. I had to have the dealer program the new key fob. $35.00