Keyless2Go 4 Button Remote Flip Key Replacement for Toyota GQ4-29T / G Chip / 89070-02620

I was able to sync it to my vehicle before getting the key cut and programmed to make sure it worked and it works great! Finding the right tutorial was a bit of a challenge so don't be discouraged if the first tutorial you try doesn't work, even if it says it's for your vehicle.I'm super pleased with this key and I'll be purchasing a backup!Here's the tutorial I followed from a youtube commenter that has a 2013 Corolla:1- Open the driver's side door. (all the other doors should remain shut)2- Insert the original key to ignition(don't turn) and remove, do this 2 times respextively.3- Shut the driver's side door, then open 2 times, leave it open.4- Insert the original key to ignition(don't turn) and remove only 1 time.5- Shut the driver's side door ,then open 2 times, leave it open.6- Insert the original key to ignition(don't turn) and remove only 1 time.7- Shut the driver's side door.8- Insert the original key turns the ignition to the on position(don't start the engine), do this 1 times (if you have a new key, you use the ADD mode):- 1 time for ADD mode (if you have a new key, you use the ADD mode)- 2 times for REWRITE mode (an existing key you would use the REWRITE mode)- 3 times for CONFIRMATION mode- 5 times for PROHIBITION mode9- Door locks will cycle once to indicate that the car is in programming mode.10- On the new key(before cutting), Press the lock and unlock buttons of the remote together for 3 seconds then release then press lock button for once.11- If the remote is programmed successfully. Door locks will cycle, if not repeat step 10.12- To end the procedure, shut the driver's side door and open.