Keyless2Go 2010 - 2023 Chevrolet GMC 4-Button Replacement Keyless Entry Remote Flip Key Fob

I ordered the keyless remote fob and received it within 5 days. I found person program my key with the help of keyless to go. They took care of me in about 10 min. I was so pleased.thank you keyless to go next time I need keys I will use your company.

Great and fast shipping

Received my new key fob removed milled key from old key fob and installed it on new one. Followed instruction for DIY programing everything worked great. Didn't need locksmith or Dealer. Save my self some money .Thank you for my key fob thumbs up and a great deal !!!!!

Great after market replacement flip key fob for my 2012 Chevy Equinox! Purchased for $16. Dealer cut for $65! Easy to self program using my old key fob!

Not received

My wife lost her original OEM Key Fob. Had key cut at GM dealer for $33.00 and my wife followed the instructions in the Buick owners manual for reprogramming the electronics in the key. She said it was quite easy and worked the first time. This was on a 2016 Buick LaCrosse, Leather, Push Button Start. Will now purchase a second one to replace my original key fob with a damaged keypad. Fortunately it still worked good enough to get my wife's new Key copied and programmed. Will try to move the key from my OEM key fob to the replacement key fob to avoid the $33 key cutting charge on the second one. BTW, one Buick Dealer quoted $55 to cut and copy just the key so look around to get a lower cost. We had ours done at a Chevrolet dealer.. They did Bad Mouth the non-oem key fob and tried to convince us that they needed to do the reprogramming as it was really difficult. Not true at all. Their job is to sell GM products., Our job was to get it done at the least possible cost. We probably saved over $100 by buying an aftermarket product. Will it last as long as an OEM Fob? I guess we will find out.

Buen precio

Easy to duplicate

I purchased these for a 2016 Chevy Equinox. As everyone knows an auto key fob falls apart after 8 years of use. With a little research and a trip to a locksmith I now have 2 new key fobs that are fully functional.Here's the breakdown; - $14 for each fob (x 2) = $28 - $25 for each fob cut at locksmith (x2) = $50 - watching 1 five minute video (thanks YouTube) - approximately 2 minutes to program said key fob (x 2) = 4 minutesFinal cost was a little over $75 and 10 minutes of my time. This would have cost me $100-$200 each at the local dealership.I've tested all buttons and they are fully functional. Even the auto-start. Some videos stated that only lock & unlock buttons worked after programming. The buttons on my 2 new fobs work exactly as they should.Research these beforehand so that you purchase the correct fob for your vehicle. It's a pain and a big waste of time if you have to return yours due to lack of research.

You only had to go to a locksmith to copy it, then just put the ignition on it in the car, stop it with the original, then repeat it with your finger and it worked, you didn't have to pay for programming like that. Thank you perfect

The keys work as expected once you get them cut and follow the YouTube instructions using the old key to start the pairing with the car process. Pairing with the car is simple, but you must follow the process and timing exactly. Prepare to pay $80-$85 for a locksmith or dealership service department to just cut the key from the old one is southern California.

Good

Love it

Peyton was easy to program ..Switched cut key … used a file to deepen the slot for the pin … the worked great

I bough a used car and it had only one key. I purched 3 fobs, took them to my local locksmith. They work great. This is much cheaper than the dealership.

Swapped old key blade into this new fob. Programming with a single insert of old fob/new fob didn’t work for me. So I followed YT instructions for 3 inserts of 10 minutes. Worked great. (You should see lock icon on dash display disappear, so you know car and fob are communicating.) I bought a second fob to have a back-up.If swapping blades, DON’T lose the pin. (One popped out of my tweezers and was lost.) And make sure you drive the pin in straight.

So far, it works well. I took both of them to a Chevy dealership to have them cut and programmed they charged me $75 for both key fobs and the both work fine so far.

Key came with a new battery installed, and after having it cut, I was able to use my owners manual to program it working great!

Great value…Dealership wanted $150 for a key. Was able to get the key and get it cut for under $20. Highly Recommended

Good quality great value ease of use

Easy to program and Ace Hardware only charged $10.00 to cut the new key.

The fob was as described. I had the key cut by a locksmith store (cheaper) I found the programming sequence on google and it works perfectly.Total spent about $45

Works perfectly for 2015 Chevy SS

Key replacement it worked.

The key fob works but their programming procedure did not work for me. I had one original key and was following the programming procedure they recommended. Apparently my car( Chevy Trax 2017) needs two programed keys to be programed with the simple procedure they provide and their chat support was not helpful at all. I have to do a bit of research before I come across another programming instructions which finally worked. I basically have to follow new key programming procedure. I have to turn the keys to on position(did not need to start the engine) and wait for 10min util the key error sign disappears from the dashboard. Repeate this 3 times in a row. On the forth round the key was programmed.Additional the FCC ID of the key fob on the product page did not match what I received and this added a lot to my confusion.

Took a chance on this low cost option. Went to Ace Hardware, they cut blank from my original for $25 and it worked perfectly. Very simple to program to work in my Equinox, took less than a minute. Directions available on line.

As I did not want to spend $250 at the dealer for my 12-year-old car key, I took a flyer on this 'clone'. It was very easy to program myself and works flawlessly so far....1 month. Quite happy. Cheers, Dean

I was able to remove the “key” from my old fob and transfer the cut key to the new fob. I then easily programmed it using directions online.

item as described and well packed, SUPER FAST shipping. AA++ seller

This is a replacement for the one I bought from Ace hardware which was cheap quality because one button stop working after only using for less than a year. I received this new one which was like my original and had a locksmith cut the key for $40.00 and with instructions sent I programmed it myself! I'm very satisfied!!